#1 Overall Winner
Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302
- Lets two people listen from one 3.5mm source (male to dual 3.5mm female, stereo on both outputs).
Comparison
The Avantree TR302 is a simple 3.5mm splitter designed to let two people listen from one device, while the beyerdynamic DT 770 PRO 80 Ohm is a closed-back studio headphone focused on detail, comfort, and isolation. If your goal is better listening quality for one person, the DT 770 PRO is the stronger overall pick; if you need shared listening on a flight or at home, the Avantree is the more practical tool.
#1 Overall Winner
Contender
Overall winner
Depends on your needs
| Feature | Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302 | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones | Winner |
|---|---|---|---|
| Product type | 3.5mm audio splitter (male to dual female) | Closed over-ear wired studio headphones | Depends |
| Overall score | 81 | 87 | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
| Primary use case | Share one source to two headphones/speakers | Recording/monitoring and focused listening | Depends |
| Audio quality | Audio pass-through; positive transfer feedback | High-resolution sound; strong customer praise | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
| Connectivity | 3.5mm AUX splitter; 2 output ports | Wired 3.5mm (includes 6.35mm adapter) | Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302 |
| Compatibility | Broad 3.5mm AUX device compatibility | Wired use; 80-ohm drive considerations | Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302 |
| Ease of setup | Very high setup/usability scores | Simple plug-in; may need amp/DAC for some | Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302 |
| Comfort for long sessions | Not applicable (accessory) | Replaceable velour pads; comfort praised | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
| Noise isolation / leakage | Not applicable (depends on your headphones) | Closed-back isolation; minimal leakage noted | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
| Build quality | Mixed durability; lower build score | Robust workmanship; higher build score | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
| Durability feedback | Some reports of falling apart / delicate cable | Mixed; some reports of plastic cracking | Tie |
| Portability | Very compact; lightweight; travel-friendly | Over-ear size; long cable; less portable | Avantree Two Way 3.5mm Dual Headphone Jack Splitter TR302 |
| Value orientation | High value score; low-cost accessory use | Worth-it sentiment for sound/build | Depends |
| Customer satisfaction signals | 4.5/5 from 6,320 reviews | 4.6/5 from 17,256 reviews | beyerdynamic DT 770 PRO 80 Ohm Over-Ear Studio Headphones |
For real-world listening performance, the products are not directly equivalent. The DT 770 PRO is a complete headphone system, and its scoring plus reviews emphasize detailed, high-resolution sound and effective sound isolation for monitoring, gaming, and long sessions. The Avantree TR302 does not create sound on its own; its “performance” is about reliably splitting a 3.5mm signal, where reviews commonly report it works as intended and can deliver audio without obvious interference for many users.
Both products show mixed durability/reliability feedback in reviews. For the Avantree TR302, the most common risk is physical reliability (some reports of it falling apart or having a delicate cable). For the DT 770 PRO, many buyers describe long-lasting construction, but there are also reports of plastic cracking over time. If you need a product to withstand heavy daily use, it’s worth factoring these patterns in and handling/storage habits (especially for cables and stress points).
The Avantree TR302 is the simpler day-to-day tool: plug it into a 3.5mm source, connect two headphones, and you’re done. This matches its very high usability and setup scoring and review sentiment around convenience (especially for travel or watching together).
The DT 770 PRO is also easy to use (it’s wired and straightforward), but usability can depend on your audio source. Some users note that 80 ohms may require a stronger output or an amp/DAC on certain devices, which can add friction compared with a basic splitter.
The design goals are different. The Avantree TR302 is built to be compact and unobtrusive, with a short cable for easy carrying. The DT 770 PRO is built for over-ear comfort and isolation, using a closed-back, circumaural design with a padded headband and velour pads. If you want minimal bulk, Avantree wins; if you want a purpose-built wearing experience for long sessions, the DT 770 PRO is better aligned.
The DT 770 PRO scores notably higher for build quality and is frequently described as well constructed and robust. The Avantree TR302 is a lightweight plastic accessory and receives mixed durability feedback; some customers say it holds up, while others report it can be fragile or fail early. If long-term hardware toughness is a priority, the DT 770 PRO has the stronger evidence overall—though it, too, has some mixed long-term reports.
The DT 770 PRO scores higher for durability and is frequently described as robust, but it’s not immune to complaints, with some users reporting cracking in plastic components. The Avantree TR302 is more often described as fragile, and its durability scoring is lower, suggesting it’s better treated as a lightweight accessory that benefits from careful storage and reduced strain on the cable.
The Avantree TR302 is the more portable option by design: small dimensions, very low weight, and commonly used for travel and flights. The DT 770 PRO can be used on the move, but it’s an over-ear studio headphone with a long cable and more bulk to pack.
The Avantree TR302 is intentionally minimal: one 3.5mm male input and two stereo 3.5mm outputs for shared listening, with no smart features and no microphone support. The DT 770 PRO offers a more complete headphone feature set for studio use, including a closed-back design for isolation, replaceable velour pads, and a 3.5mm jack with 6.35mm adapter for studio gear.
Avantree TR302: Plug into a 3.5mm source and connect two headphones—this aligns with its extremely high setup score and the common “works as expected” review theme.
DT 770 PRO: Also simple (wired), but first-time setup success can depend on the source device’s headphone output power. If your device struggles with 80 ohms, you may need to add or use different equipment (amp/DAC/interface).
The Avantree TR302 is broadly compatible with devices that provide a standard 3.5mm headphone output (AUX), and users report it working with a range of headphones and devices. The DT 770 PRO is compatible with any device that can accept a wired 3.5mm headphone connection (or 6.35mm with the adapter), but 80-ohm impedance can affect how well different sources drive it—some setups may benefit from an amp/DAC.
The beyerdynamic DT 770 PRO is the audio-quality leader, backed by a higher audio-quality score and consistent review themes: detailed, clear sound with tight bass and strong overall balance. The closed design also helps with isolation and immersion.
The Avantree TR302 is not a headphone and won’t “improve” sound by itself, but customers frequently report clean splitting without noticeable static or volume drop in typical use. Your results will depend on the headphones connected and the source device’s headphone output.
The Avantree TR302 is built around connectivity: a single 3.5mm input feeding two stereo outputs for shared listening, with broad support for common AUX devices. The DT 770 PRO is a wired headphone with a 3.5mm jack and an included 6.35mm adapter, which is helpful for studio interfaces and amplifiers, but it’s still a single-listener connection rather than a sharing solution.
The Avantree TR302 rates very strongly for value because it reliably addresses a specific problem—two people listening from one device—with minimal setup and broad compatibility. The DT 770 PRO is widely viewed as worth paying for when you actually need a monitoring headphone: reviews emphasize sound quality, comfort, and isolation.
Neither is “better value” in isolation; the best value depends on whether you’re buying a sharing accessory or a primary headphone.
Based on the provided scoring, beyerdynamic rates higher on brand trust, consistent with its professional studio positioning and strong customer satisfaction. Avantree also shows solid brand trust and strong customer satisfaction for this accessory, but warranty/support scoring is lower on both products, so it’s worth checking return windows and seller support details before purchasing.
Both products have strong Amazon satisfaction signals. The Avantree TR302 is rated 4.5/5 across 6,320 reviews, with repeated praise for ease of use, clean sound transfer, and travel usefulness—tempered by durability complaints. The DT 770 PRO holds 4.6/5 across 17,256 reviews, with consistent praise for sound quality, comfort, and isolation, plus some mixed reports about long-term cracking or wear.
The provided scoring suggests limited clarity/strength in warranty/support for both products (with DT 770 PRO slightly higher). Since specific warranty terms aren’t included in the data, it’s best to confirm the warranty length, replacement policy, and return process with the retailer listing before buying—especially if durability is a concern for your use case.
If you’re shopping for an actual pair of headphones and want the best overall experience for sound quality, comfort, and isolation, the beyerdynamic DT 770 PRO 80 Ohm is the stronger overall pick based on its higher overall scoring and consistently positive review themes around clarity and long-session wear.
The Avantree TR302 still makes the most sense when your problem is different: you need an inexpensive, highly portable way to share one 3.5mm output with two listeners. It earns its place through excellent ease of use and compatibility, but you should treat it as a lightweight accessory and be mindful of the mixed durability comments. In short: DT 770 PRO for better listening; Avantree for shared listening.
Overall winner
Depends on your needs
They solve different problems. The beyerdynamic DT 770 PRO (80 ohm) is the stronger overall audio product with higher overall scoring and standout sound/isolation feedback, making it the better choice if you need headphones for monitoring or focused listening. The Avantree TR302 is a practical accessory for sharing one 3.5mm output with two listeners, with excellent usability and value, but it is not a sound-upgrade device.
Only the Avantree TR302 is designed for that. It’s a 3.5mm male to dual 3.5mm female splitter, and each output is stereo, so two people can listen from one phone, tablet, laptop, or other AUX source. The DT 770 PRO is a single pair of headphones for one listener.
The beyerdynamic DT 770 PRO is the clear choice for sound quality based on its higher audio-quality scoring and review themes like detailed, clear audio, tight bass, and a balanced soundstage. The Avantree TR302 can pass audio cleanly (many users report no static or noticeable volume drop), but it’s still just an adapter—your sound quality will mainly depend on your source device and headphones.
The Avantree TR302 explicitly notes it is an audio splitter with no microphone support. For the DT 770 PRO, the provided information focuses on monitoring/recording headphones and does not describe a built-in mic. If mic support is critical, check your headset/headphone mic requirements and whether your device needs a TRRS connection.
Both are straightforward, but the Avantree TR302 is as simple as plugging it into a 3.5mm jack and connecting two headphones; it also scores extremely high for setup/usability. The DT 770 PRO is also plug-and-play, but some users note the 80-ohm version may be harder to drive on certain computers without an amp/DAC, which can add an extra step.
For pure portability and convenience, the Avantree TR302 is easier to travel with: it’s small, lightweight, and specifically praised for plane use when sharing a movie or music. The DT 770 PRO can be used on the move, but it’s a larger over-ear wired headphone with a long cable, so it takes more bag space and is less grab-and-go than a small splitter.
Based on the scoring and review summaries, the DT 770 PRO rates higher for build quality and durability overall, with many customers describing robust workmanship. However, durability feedback is still mixed, including reports of plastic cracking within a year. The Avantree TR302 has more fragility complaints (including falling apart early) and lower durability-related scoring, even though many users find it works well.
It can, but it depends on your device. Reviews note that the 80-ohm impedance can be harder for some computers to drive, while other devices (like a phone or portable player) may cope better, and some users add a DAC/amp. If you listen at modest volumes and your device has a strong headphone output, you may be fine; otherwise consider your source equipment.
The answer depends on what you’re buying for. The Avantree TR302 is consistently described as a good-value, low-cost way to add shared listening, and it scores very highly for value. The DT 770 PRO is more expensive but is widely viewed as worth it for studio-grade sound, comfort, and isolation. Choose based on whether you need an accessory or a primary listening tool.
Check our rankings and expert guides to find the best electronics products for your goals.